|
加纖35%PA66食品級 A3EG7 FC BASF ® 巴斯夫尼龍66 射出成型 注塑料
- 起訂量 (千克)價格
- 25-500￥32 /千克
- 500-1000￥31 /千克
- ≥1000￥30 /千克
- 品牌：巴斯夫
- 貨號：05131
- 發布日期： 2022-11-30
- 更新日期： 2025-09-30
產品詳請
| 品牌 | 巴斯夫 |
| 貨號 | 05131 |
| 用途 | 注塑 |
| 牌號 | A3EG7 |
| 型號 | A3EG7 |
| 品名 | PA66 |
| 外形尺寸 | 顆粒 |
| 生產企業 | 巴斯夫 |
| 是否進口 | 是 |
溫馨提示：因橡塑行情波動太大，線上價格未能及時更新，更多詳情及技術問題請來電咨詢(微信同號）
Ultramid® A3EG7 FC Aqua sw23285 | PA66-GF35 | BASF
Product Texts
Ultramid® A3EG7FC Aqua black 23285 is optimized for plastic parts, mandatory requiring material approvals for drinking water or direct food contact
The product is approved according to
? 21 CFR FDA § 177.1500 "Nylon resins" (for repeated use applications only)
? 21 CFR FDA § 178.3297 "Colorants for polymers” (for repeated use applications only)
? European Food Contact European Food Contact Commission Regulation (EU) 10/2011
? GMP (EC) n°2023/2006
and provides the approvals for drinking water regulations of
? KTW
? DVGW W270
? WRAS
? ACS (disclosure of ingredients)
? NSF (disclosure of ingredients)
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com, Fax 49 621-60-93253).
The product is approved according to
? 21 CFR FDA § 177.1500 "Nylon resins" (for repeated use applications only)
? 21 CFR FDA § 178.3297 "Colorants for polymers” (for repeated use applications only)
? European Food Contact European Food Contact Commission Regulation (EU) 10/2011
? GMP (EC) n°2023/2006
and provides the approvals for drinking water regulations of
? KTW
? DVGW W270
? WRAS
? ACS (disclosure of ingredients)
? NSF (disclosure of ingredients)
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com, Fax 49 621-60-93253).
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate, MVR | 30 / * | cm3/10min | ISO 1133 |
| Temperature | 275 / * | °C | ISO 1133 |
| Load | 5 / * | kg | ISO 1133 |
| Molding shrinkage, parallel | 0.4 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.0 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 11500 / 8500 | MPa | ISO 527-1/-2 |
| Stress at break | 210 / 150 | MPa | ISO 527-1/-2 |
| Strain at break | 3 / 5 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1000h | * / 6650 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 95 / 105 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 75 / - | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 14 / 22 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 12 / - | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 260 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 250 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 250 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 250 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 17.5 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 65 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.6 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Oxygen index | 24 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 1MHz | 3.5 / 5.7 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 200 / 1500 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E10 | Ohm | IEC 62631-3-2 |
| Electric strength | 39 / 37 | kV/mm | IEC 60243-1 |
| Comparative tracking index | - / 550 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.6 / * | % | Sim. to ISO 62 |
| Density | 1410 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 145 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 195 | °C | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 290 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 200 | mm/s | ISO 294 |
| 等級 | 廠家 | 型號 | 特性 | 用途 |
|---|---|---|---|---|
| 食品級 | BASF ® 巴斯夫 | A3EG7 FC | 35%玻璃纖維增強的注塑級產品，用于與食品接觸的物品。 | 射出成型 |
| 食品級 | BASF ® 巴斯夫 | A3EG6 FC | 30％玻璃纖維，符合FDA，歐洲食品接觸（EU）Nr等多個區域食品接觸法規。10/2011和GMP（EC）n°2023/2006。 | 射出成型 |
| Ultramid® B | PA 6（非增強型）是一種堅固的硬質材料，采用該材料制成的零件即使在干燥狀態及低溫條件下仍可保持良好的阻尼和抗沖擊性能。PA 6的顯著特性體現在 的耐沖擊性，且易于加工。 |
| Ultramid® A | 在所有非增強型聚酰胺材料中，PA 66與Ultramid® T （PA6/6T）的硬度、剛度、耐磨性和熱穩定性均達到 水平。PA 66能夠耐受機械應力和熱應力，是制造電氣、機械、汽車和化學工程零件的 材料之一。 |
| Ultramid® C | Ultramid® C是由PA 6和PA 66結構單體組成的共聚酰胺（PA6/66）系列產品。每種產品的性能因成分組成的不同而不同 |
| Ultramid® T | 此種材料含有芳香共聚酰胺（PA6/6T）成分，具有 的熱穩定性（熔點298℃）、剛度和尺寸穩定性，在各種濕度條件下均可保持機械性能不變。 |
|
玻璃纖維增強型 Ultramid |
此類材料具有優異的機械強度、硬度、剛度、熱穩定性，并能良好地耐受熱潤滑劑和熱水。由該材料制成的零件具有 的尺寸穩定性和蠕變強度。此外，玻璃纖維增強型Ultramid® T的顯著優勢還在于優良的耐熱性（290℃）。 |
| 阻燃型產品 | 此類Ultramid®產品包括C3U、A3X2G5、A3X2G7、A3X2G10、B3UG4和T KR4365G5，特別適用于制造對防火安全性及耐電痕性要求較高的電氣元件。 |
| 礦物填充型 Ultramid | 此類聚酰胺材料的特殊優勢在于剛度強、尺寸穩定性較佳，不易翹曲變形，表面光滑且具有良好的流動性。 |
