|
Ultramid A3EG7 燈座外殼 冷卻風扇 鋁窗框的絕緣型材 汽車冷卻系統的水容器以及電氣絕緣部件。
- 起訂量 (千克)價格
- 25-500￥38 /千克
- 500-1000￥36 /千克
- ≥1000￥35 /千克
- 品牌：巴斯夫
- 貨號：05131
- 發布日期： 2022-11-30
- 更新日期： 2025-09-30
產品詳請
| 品牌 | 巴斯夫 |
| 貨號 | 05131 |
| 用途 | 注塑 |
| 牌號 | A3EG7 |
| 型號 | A3EG7 |
| 品名 | PA66 |
| 外形尺寸 | 顆粒 |
| 生產企業 | 巴斯夫 |
| 是否進口 | 是 |
溫馨提示：因橡塑行情波動太大，線上價格未能及時更新，更多詳情及技術問題請來電咨詢(微信同號）
Ultramid® A3WG7 | PA66-GF35 | BASF
Product Texts
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial items such as gear wheels, solenoid valve housings, cable attachments, automotive fuel distributors and components for automotive gearshift.
Rheological properties
dry / cond
Unit
Test Standard
Melt volume-flow rate, MVR
20 / *
cm3/10min
ISO 1133
Temperature
275 / *
°C
ISO 1133
Load
5 / *
kg
ISO 1133
Molding shrinkage, parallel
0.4 / *
%
ISO 294-4, 2577
Molding shrinkage, normal
1.0 / *
%
ISO 294-4, 2577
Mechanical properties
dry / cond
Unit
Test Standard
Tensile modulus
11500 / 8500
MPa
ISO 527-1/-2
Stress at break
210 / 150
MPa
ISO 527-1/-2
Strain at break
3 / 5
%
ISO 527-1/-2
Tensile creep modulus, 1h
* / 7450
MPa
ISO 899-1
Tensile creep modulus, 1000h
* / 6600
MPa
ISO 899-1
Charpy impact strength, +23°C
95 / 105
kJ/m2
ISO 179/1eU
Charpy impact strength, -30°C
75 / -
kJ/m2
ISO 179/1eU
Charpy notched impact strength, +23°C
14 / 22
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -30°C
12 / -
kJ/m2
ISO 179/1eA
Thermal properties
dry / cond
Unit
Test Standard
Melting temperature, 10°C/min
260 / *
°C
ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa
250 / *
°C
ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N
250 / *
°C
ISO 306
Coeff. of linear therm. expansion, parallel
23 / *
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
93 / *
E-6/K
ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness
HB / *
class
IEC 60695-11-10
Thickness tested (1.5)
1.5 / *
mm
IEC 60695-11-10
Yellow Card available
Yes / *
-
-
Burning behavior at thickness h
HB / *
class
IEC 60695-11-10
Thickness tested (h)
0.7 / *
mm
IEC 60695-11-10
Yellow Card available
Yes / *
-
-
Oxygen index
24 / *
%
ISO 4589-1/-2
Electrical properties
dry / cond
Unit
Test Standard
Relative permittivity, 1MHz
3.5 / 5.7
-
IEC 62631-2-1
Dissipation factor, 100Hz
200 / 3000
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
200 / 3000
E-4
IEC 62631-2-1
Volume resistivity
1E13 / 1E10
Ohm*m
IEC 62631-3-1
Surface resistivity
* / 1E10
Ohm
IEC 62631-3-2
Electric strength
40 / 34
kV/mm
IEC 60243-1
Comparative tracking index
- / 450
-
IEC 60112
Other properties
dry / cond
Unit
Test Standard
Water absorption
5 / *
%
Sim. to ISO 62
Humidity absorption
1.6 / *
%
Sim. to ISO 62
Density
1410 / -
kg/m3
ISO 1183
Material specific properties
dry / cond
Unit
Test Standard
Viscosity number
145 / *
cm3/g
ISO 307, 1157, 1628
Rheological calculation properties
Value
Unit
Test Standard
Ejection temperature
195
°C
-
Test specimen production
Value
Unit
Test Standard
Injection molding, melt temperature
290
°C
ISO 294
Injection molding, mold temperature
80
°C
ISO 294
Injection molding, injection velocity
200
mm/s
ISO 294
Ultramid® A3WG7 | PA66-GF35 | BASF
Product Texts
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial items such as gear wheels, solenoid valve housings, cable attachments, automotive fuel distributors and components for automotive gearshift.
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate, MVR | 20 / * | cm3/10min | ISO 1133 |
| Temperature | 275 / * | °C | ISO 1133 |
| Load | 5 / * | kg | ISO 1133 |
| Molding shrinkage, parallel | 0.4 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.0 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 11500 / 8500 | MPa | ISO 527-1/-2 |
| Stress at break | 210 / 150 | MPa | ISO 527-1/-2 |
| Strain at break | 3 / 5 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | * / 7450 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | * / 6600 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 95 / 105 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 75 / - | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 14 / 22 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 12 / - | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 260 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 250 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 250 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 23 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 93 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.7 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Oxygen index | 24 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 1MHz | 3.5 / 5.7 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E10 | Ohm | IEC 62631-3-2 |
| Electric strength | 40 / 34 | kV/mm | IEC 60243-1 |
| Comparative tracking index | - / 450 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.6 / * | % | Sim. to ISO 62 |
| Density | 1410 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 145 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 195 | °C | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 290 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 200 | mm/s | ISO 294 |
玻纖增強級
| 等級 | 廠家 | 型號 | 特性 | 用途 |
|---|---|---|---|---|
| 玻纖增強級 | BASF ® 巴斯夫 | A3WG6 | 30％玻璃纖維增強和耐熱注塑PA66級，用于機械部件和殼體，具有高剛度和尺寸穩定性。 | 典型的應用包括燈座外殼，冷卻風扇，用于鋁窗框的絕緣型材，用于汽車冷卻系統的水容器。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3WG5 | 玻璃纖維25%增強，良好的耐熱性 高維穩定性 高剛性 耐油性能 | 機器/機械部件 外殼 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3WG3 | 玻璃纖維15%增強，良好的耐熱老化性能 良好剛性 耐油性能 | 外殼 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3EG7 | 35％玻璃纖維增強的注塑成型PA66級，用于機械部件和殼體，具有高剛度和尺寸穩定性。 | 應用包括燈座外殼，冷卻風扇，用于鋁窗框的絕緣型材，用于汽車冷卻系統的水容器以及電氣絕緣部件。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3HG7 | 35％玻璃纖維增強的注塑成型PA66級,高尺寸穩定性 高剛度 耐油 | 機械部件和殼體，例如齒輪，電磁閥殼體，電流加熱器，拖曳電纜附件以及電絕緣零件。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3EG6 | 30％玻璃纖維增強的注塑成型PA66級，用于機械部件和殼體，具有高剛度和尺寸穩定性。 | 典型的應用包括例如燈座外殼，冷卻風扇，鋁窗框的絕緣型材和電氣絕緣部件。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3EG5 | 25%玻璃纖維增強注塑級，用于高剛性和尺寸穩定性的機械零件和外殼， 耐油 | 例如線圈架和軸承保持架。也用于電絕緣零件。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3HG5 | 25％玻璃纖維增強的注塑成型PA66級。高尺寸穩定性 ,高剛度 耐油 | 典型的應用包括具有高剛度和尺寸穩定性的機械部件和殼體。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3EG3 | 15％玻璃纖維增強的注塑成型,剛度好 耐油 | 電器零件 電子絕緣 房屋 機械/機械零件 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3HG6 HR | 30％玻璃纖維增強的PA66注塑級。它具有良好的抗水解性, 耐油 | 汽車應用,典型的應用包括汽車散熱器安裝框架。 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3WG10 | 玻璃纖維50%增強 剛性，高 良好的耐熱老化性能 耐油性能 | 工業應用 |
| 玻纖增強級 | BASF ® 巴斯夫 | A3WG7 | 35％玻璃纖維增強和耐熱注塑PA66級，用于工業設備。 | 典型應用包括齒輪，電磁閥殼體，電纜附件，汽車燃油分配器和汽車變速箱組件。 |
