|
本色加纖30%LCP液晶高分子塑料 VECTRA® E130i VF2201
- 起訂量 (千克)價格
- 25-500￥72 /千克
- 500-1000￥71 /千克
- ≥1000￥70 /千克
- 品牌：日 本寶 理
- 貨號：05131
- 發布日期： 2022-11-29
- 更新日期： 2025-09-30
產品詳請
| 品牌 | 日 本寶 理 |
| 貨號 | 05131 |
| 用途 | 注塑 |
| 牌號 | E130i VF2201 |
| 型號 | E130i VF2201 |
| 品名 | LCP |
| 外形尺寸 | 顆粒 |
| 生產企業 | 日 本寶 理 |
| 是否進口 | 是 |
溫馨提示：因橡塑行情波動太大，線上價格未能及時更新，更多詳情及技術問題請來電咨詢(微信同號）
VECTRA® E130i VF2201/BK210P 特性：耐高溫，易流動。
VECTRA® E130i VF2201/BK210P 用途：適用于需要非常薄的墻壁的地方。廣泛用于SMT應用，尺寸變化極小。30%玻璃填充。
VECTRA原則上應預先干燥。
由于必要的低 殘留水分含量，建議使用干燥的空氣干燥器。
露點應=< - 40°c。干燥和加工之間的時間應盡可能短。
在干燥器中儲存材料，直到處理溫度不需要降低A, B, C, D和V級(<= 24小時)。
VECTRA® E130i | LCP-GF30 | Celanese
Product Texts
High temperature capability, easiest flow. Suitable where very thin walls are required. Used for broad range of SMT applications, with minimal dimensional change. 30% glass filled. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant FDA compliant UL-Listing V-0 in natural and black at .2mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electrical 240°C, mechanical 240°C at 0.75mm. UL = Underwriters Laboratories (USA)
| Flammability at thickness h | V-0 | - |
| Rheological properties | Value | Unit | Test Standard |
| Molding shrinkage, parallel | 0.1 | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 0.4 | % | ISO 294-4, 2577 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 16000 | MPa | ISO 527-1/-2 |
| Stress at break | 160 | MPa | ISO 527-1/-2 |
| Strain at break | 1.6 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 43 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 38 | kJ/m2 | ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| Melting temperature, 10°C/min | 335 | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 270 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 8.00 MPa | 216 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 195 | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 7 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 20 | E-6/K | ISO 11359-1/-2 |
| Burning behavior at thickness h | V-0 | class | IEC 60695-11-10 |
| Oxygen index | 45 | % | ISO 4589-1/-2 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 4 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.9 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 100 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 360 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | 1E14 | Ohm | IEC 62631-3-2 |
| Electric strength | 32 | kV/mm | IEC 60243-1 |
| Other properties | Value | Unit | Test Standard |
| Humidity absorption | 0.03 | % | Sim. to ISO 62 |
| Density | 1610 | kg/m3 | ISO 1183 |
