|
Zytel®79G13HSL BK039 加纖13%黑色尼龍韌性好 熱穩定性 自潤滑PA66
- 起訂量 (千克)價格
- 25-100￥48 /千克
- 100-1000￥47 /千克
- ≥1000￥46 /千克
- 品牌：杜邦
- 貨號：05131
- 發布日期： 2022-11-28
- 更新日期： 2025-09-30
產品詳請
| 品牌 | 杜邦 |
| 貨號 | 05131 |
| 用途 | 注塑 |
| 牌號 | 79G13HSL BK039 |
| 型號 | 79G13HSL BK039 |
| 品名 | PA66 |
| 外形尺寸 | 顆粒 |
| 生產企業 | 杜邦 |
| 是否進口 | 是 |
溫馨提示：因橡塑行情波動太大，線上價格未能及時更新，更多詳情及技術問題請來電咨詢(微信同號）
特性：79G13HSL BK039是13%玻璃增強，熱穩定，潤滑輕微增韌黑色尼龍66注塑成型。它提高了抗沖擊性。
用途：注塑成型，汽車，家具，家用電器。
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage, parallel | 0.5 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 0.8 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 5100 / 3700 | MPa | ISO 527-1/-2 |
| Stress at break | 115 / 67 | MPa | ISO 527-1/-2 |
| Strain at break | 4 / 10 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 67 / 59 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 59 / 54 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 8 / 12 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 6 / 6 | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 240 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 260 / * | °C | ISO 75-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning rate, thickness 1 mm | 24 | mm/min | ISO 3795 (FMVSS 302) |
| FMVSS | B | - | ISO 3795 (FMVSS 302) |
| Electrical properties | dry / cond | Unit | Test Standard |
| Volume resistivity | >1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E12 | Ohm | IEC 62631-3-2 |
| Electric strength | 44 / 32 | kV/mm | IEC 60243-1 |
| Other properties | dry / cond | Unit | Test Standard |
| Density | 1210 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 163 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 210 | °C | - |
