|
擠出級PA66涂層 103HSL NC010 未增強尼龍66 熱穩定聚酰胺66 擠壓成型
- 起訂量 (千克)價格
- 25-100￥48 /千克
- 100-1000￥47 /千克
- ≥1000￥46 /千克
- 品牌：杜邦
- 貨號：05131
- 發布日期： 2022-11-27
- 更新日期： 2025-09-30
產品詳請
| 品牌 | 杜邦 |
| 貨號 | 05131 |
| 用途 | 注塑 |
| 牌號 | 103HSL NC010 |
| 型號 | 103HSL NC010 |
| 品名 | PA66 |
| 外形尺寸 | 顆粒 |
| 生產企業 | 杜邦 |
| 是否進口 | 否 |
溫馨提示：因橡塑行情波動太大，線上價格未能及時更新，更多詳情及技術問題請來電咨詢(微信同號）
Zytel®尼龍樹脂良好的熔體穩定性通常能夠回收適當處理的生產廢料。如果不能回收利用，杜邦建議在適當配備的裝置中焚燒并回收能量(-31kJ/g基聚合物)，作為 方案。對于處置，必須遵守當地法規。
Zytel®尼龍樹脂通常用于苛刻的應用在汽車，家具，家用電器，體育用品和建筑行業。
Zytel® 103HSL NC010 is a heat stabilized, lubricated polyamide 66 resin for injection molding.
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage, parallel | 1.3 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.3 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 3100 / 1400 | MPa | ISO 527-1/-2 |
| Yield stress | 85 / 55 | MPa | ISO 527-1/-2 |
| Yield strain | 4.3 / 25 | % | ISO 527-1/-2 |
| Nominal strain at break | 20 / >50 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | * / 1200 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | * / 650 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | N / N | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 400 / N | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 5.5 / 12 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 4.5 / 3.5 | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| Glass transition temperature, 10°C/min | 60 / * | °C | ISO 11357-1/-2 |
| Temp. of deflection under load, 1.80 MPa | 70 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 200 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 240 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 100 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 110 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | V-2 / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | V-2 / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.7 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| FMVSS | SE | - | ISO 3795 (FMVSS 302) |
| Oxygen index | 28 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 100Hz | 3.8 / 12.8 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.5 / 4 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 75 / 5800 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 165 / 700 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 / 1E11 | Ohm*m | IEC 62631-3-1 |
| Electric strength | 31 / 28 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 600 / - | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 8.5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 2.6 / * | % | Sim. to ISO 62 |
| Density | 1140 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 150 / * | cm3/g | ISO 307, 1157, 1628 |
| Film Properties | dry / cond | Unit | Test Standard |
| Strain at yield, parallel | 4.5 / * | % | ISO 527-3 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 980 | kg/m3 | - |
| Thermal conductivity of melt | 0.16 | W/(m K) | - |
| Spec. heat capacity melt | 2790 | J/(kg K) | - |
| Eff. thermal diffusivity | 5E-8 | m2/s | - |
| Ejection temperature | 190 | °C | - |
